Psssttt...it's that time!!

Happy Happy Sunday morning all and I hope it's been a good one so far!!! I have been working on some bracelet holders for all the bracelets I have been making lately. No need in them just lying around...so the cats can try and sneak off with em ..hehe.  I hear some asking "what's a bracelet holder Regi?".  If you are new visiting under the old Southern ooaks tree or missed the post then just click HERE and learn how to make one for yourself.  Here are two I made to hold the beaded memory wire bracelets and one for the hemp rope ones.

This one I used paper on all of it. Around the bottom I used some ribbon that had tiny pearls sewed to it. Notice the paper on the bracelet holder part.....it has PEARLS!!!

This one I used paper for the bottom and the short column and used a felt sheet for the bracelet holder part.
I glued tiny shells around the bottom. Pretty, eh?  If you would like me to make YOU one just send me a comment and I will be more than happy to and then list it in my Etsy shop just for you. The cost will be $10 plus shipping. (remember though, I did give you a "How to" on making your own above) Also, I will choose the papers and or felt.

While I was waiting for the glue to dry on the blue one I worked on another hemp rope bracelet. I just love the deep burgundy rope with the turquoise turtle beads. Add an olive shell to it and well it's just a perfect lil beach theme bracelet.

Now if you will remember, a few days ago, I said that I would be giving away one of my jewelry pieces. Today is the day!! No hoops to jump through, I promise. Just be the fifth person to leave me a comment and you will be receiving a bracelet in the mail. Make sure you're not set up as a "No-reply" blogger/commenter or I will have no way to get in touch with you. If you're not sure then click HERE and see how you can find out and even how to fix it. Make sure to leave me an email address so I can contact you, if you are the 5th one. (Ohhhh...and only one post per person counts..hehe) Share my blog with friends and better improve your chances of being the 5th commenter. Hmmmmm....I might just send the person that sends new friends that start following me here a little sumthin sumthin as a thank you. Just make sure they mention YOUR name in their comment. Let's have some FUN this year and what's more FUN than receiving a surprise in the mail.

Until next time...........Hugs,
Regi

Let's recycle some toilet paper holders, shall we..hehe

Yes......you read my title right. Let's get out those toilet tissue and paper towel holders you have been saving. WHAT?? You haven't been saving any. Well...ya just might want to start after this "How To". Let's get started, shall we? ^_^

First ya need to gather some things...yes yes....besides the holders and you probably have everything already on hand.

The main items are of course the holders, some glue, scissors, pencil, felt and scrapbook paper.

You can use other items instead of the felt and paper....like leather, fabric, wallpaper. Just

about anything you can glue and wrap.

 You will also need a tape measure or ruler, exacto knife and sharpie.

I already told ya about the pencil...hehe

This is optional but I use it whenever I make one because it gives the holder

that extra balancing strength. I make a good bit of my bracelets with beads

and or stones so I need the stability to the piece. 

First thing I do is take the toilet tissue holder and lay it down on the scrapbook paper. I just happen to have the perfect size height wise. I keep all my scrap pieces and soooo happy happy that I do, just for this reason. Place the holder on the portion of the paper that you want showing. Then fold the paper over the holder and cut the paper to wrap around once. Make sure you leave enough to cover the seam. No gluing yet...lay the paper to the side for now.

Next take the paper towel holder and lay it on your felt. The felt squares you buy at the craft store are actually a perfect fit for this project. It leaves about 1/2 inch on either side and that's a good thing. Roll the holder over the felt and cut down the length and remember to keep enough to cover your seam. We don't want to see any paper holder when finished with our pretty bracelet holder now do we. NOOO , we don't!!

Now do the same as you did when finished measuring for the other holder. Lay it aside and no gluing yet!!

Most paper towel holders are 11 inches and we need to find the center. Mark it so you know where it is and then place the toilet tissue holder on top of it and mark all around it. I have trouble seeing pencil so once I mark it off with it, I take my sharpie and highlight it. You may not have old eyes like me and can skip this part. HAHA  

I use my exacto knife to get started with. You need to cut out the circle you just drew and don't worry if ya have to cut it a bit more in just a moment. I always have to but I'd much rather clip a bit here and there than to make the hole to big to start with. Then ya get to start this part all over!! You want the hole to be big enough to slip the toilet tissue holder inside....like making a "T".

Avast me hearties....we just made a pirate eye patch...hehe

Wasn't that easy....we're all done!!  Ohhhhh, I'm just teasing, come back here. Did ya forget about the felt and paper we cut out? Now it's time to decorate our holder.

Take your scrapbook paper and cover it with glue. Place the toilet tissue holder on the edge and slowly start to roll it over the paper. Take your time so that the paper stays straight on the holder. When you get to the end dab a little bit more glue on and push the seam down really well. Make sure to wipe off any excess glue.

I normally take a small piece of the felt and glue it to the bottom. Once the glue is dry you can clip around the base.

Take the felt and dab glue on the end you are going to start rolling at. Roll it enough to make it stick and then take your glue and put it all over the holder. Slowly roll the holder over the felt and once completely wrapped dab some glue on the seam and press down. Wipe any excess off. 

Remember the 1/2 inch I told ya would hang over the ends? Here's why I said that was a good thing. Place some glue inside the holder and then fold the extra in and smooth all around. This gives it a nice finished look.

Depending on the glue you used I would let the paper towel holder sit and dry for a few minutes. Once dry take the exacto knife and punch a hole where our original hole was. No worries...you will be able to see it, it dips in.  Now take your scissors and cut an X taking it right up to the end as close as you can get.  Looks kinda like lips puckering up...hehe  Then simply push them inside and place the toilet tissue holder into the hole. If you aren't going to be putting any heavy bracelets on the holder then you are finished. If you are then let's do this step to have a strong base.

I normally use the same scrapbook paper I used to cover the toilet tissue holder with. I find an area that I want to use and hold the disc behind it up to the light so that I can see that it lines up where I want it to be.

Take the disc still behind the paper and flip over. Trace around the disc and then cut the circle out. Put some glue on the disc and glue the paper down. Let it dry a bit and then just trim any overhanging edges. Glue the holder to the base and you're finished this time. (unless you're like me and want to add a few more embellishments. I like to run one of my twisted square knot ropes around the toilet tissue holder where it meets the disc base.)

That's how you make a cute bracelet holder out of toilet tissue and paper towel holders. Pretty niftty, eh? If you're wondering where I got the disc from it's an old playstation disc. Yes...I keep just about everything. I mean ya never know when I might need it...hehe

Until next time......Hugs,

Regi

Ohhhh, I felt like someone was "watching" me while I was making this and I was right. No No it wasn't my ghostie friends. It was sweet Callie Bear. That's Boo all curled up napping!!